Samsung Galaxy S Duas s7562 Charging Problem

• usb device not connected
• not charging
• charging show but battery not charge
• charging print damage 

              

Nokia Lumia 540 Charging Way

              Nokia lumia 540 charging problem

Nokia x1-01 mic ways

How to hard reset my nokia lumia 540

How to hard reset nokia lumia 540 

• Switch off the phone and remove your sim card
• Insert battery press and hold power on key in a few seconds.
• Then press power key key once again 
• After press and hold volume down key.
• Release the both key when you see the exclamation mark. 

Mobile Phones Call related All Code

1. Cancel All Divert Call.     

           ##21#     [Send]    

2. Check Status for Divert Call

          *#21#      [Send]

3. All over Divert Call Cancel Code

        ##002#    [Send]

4. Set in Call wating

       *43#       [Send]

5. Cancel for Call Wating

        #43#    [Send]

       

  

Free internet lifetime unlimited

Welcome back in hacking world

now airtel users can enjoy free unlimited 3G internet without any data pack using the trick given below. No data pack is needed.

this trick is personal tested in by me in my region also works in whole india. So please try and share your reviews in the comment box.

Requirement

• Airtel 2G/3G sim
• Operamini_Android_achusoft_airtel_mod apk.(Download here)download here
• Android mobile

How to activate 

• Open your Android mobile setting -more-mobile network- access point
• In the access point name is "airtel" and create anew apn.

Name- mobile9trick

Apn- airtelgprs.com

Proxy- 141.000.011.253

port- 80

user name and password- none

Save the setting and use default. Open  the opera achusoft and enjoy.

Samsung Galaxy core 2 Display problem

This solution may help fix Samsung Galaxy Core 2 G355H that shows a dark display over LCD screen.This problem is a failure of the LCD’s white backlight LED bulb. To quickly fix the problem you may check the highlighted components showed below. Those are the key components that holds for the LCD’s backlight LED.

LCD connectors in Samsung Galaxy Core 2 SM-G355H or any other mobile phones for that matter are a little fragile. They can get damaged because of many reasons. Most of the times, LCD connectors get damaged because of poorly connecting and disconnecting LCD or if your mobile phone get water damaged they can easily get rusted and as soon as you unplug the LCD they crack.

Replace the LCD connector if you think it’s damaged. I have also marked all of the Samsung Galaxy Core 2 G355H LCD connector jumper ways in the diagram below. Only make the jumper if the connection prints are damaged.

Here are Samsung Galaxy Core 2 G355H Display connector jumpers ways. Please study these diagrams very carefully before you start repairing.

Solution from step by step

” Note: ensure that the LCd is okay or try replacing it before proceeding”
1. Check the LCD pin connector for possible damaged, resolder if necessary.
2. Trace each of the LED + (positive and LED – (negative connection line paths down to the resistors where it is being connected.
3. Check the connected resistor, replace if found damaged.
4. Check the volts battery voltage (VBAT) across the inductor coil, check also the coil for possible open circuit.
5. If the voltage reading is okay and the coil is good. Replace the the LED driver IC

Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.

Samsung Galaxy j2 4g hard reset

Step 1: First turn off your Samsung smartphone.

Step 2: Release any SIM card and SD card on your smartphone.

Step 3: Press and Hold Vol+ key, Home key and Power key 10 seconds.

Step 4: After some time you got system recovery mode Use Vol – key select wipe data/factory reset and press Power key to confirm.

Read also: How to Hard Reset Samsung Galaxy S2 4G I9100M with Factory Reset
Step 5: Use Vol- key to select Yes — delete all user data and press Power key to Confirm. (Notice: when you select Yes — delete all user data  and press POWER key you lost your phone all user data)

Step 6: Wait until complete reset your phone, select reboot system now and press Power key.

Step 7: Now your smartphone will reboot.

Step 8: Your Android smartphone is now OK!!